2016 AerWay® AWF S300

2016 AerWay® AWF S300

The AerWay AWF Folding Frame machine has been developed to satisfy the demands of farmers working moderate to larger acreages. AerWays Quick Adjust swing arms allow the user to choose the degree of compaction relief, cultivation, aeration, and/or residue incorporation. The AWF models are available in a variety of sizes, ranging from 20’ to 30’. The AWF200 and AWF25N units have a narrow transport width of 10’ 9” while the AWF25W and AWF300 units have a transport width of 15’ 9”.

Features may include:

• The AerWay is constructed of a heavy duty center frame and two wing frames. These frames are structural steel weldments with integral weight trays. The hydraulically folded unit is equipped with a weight transfer system that permits a constant down force across the width of the machine. This system also permits the wings to follow the contours of the field. The frame has Category III front brackets and integral rear brackets for the attachment of an optional AerWay Pull Type Wheel Kit. Additional Hard Points on the frame allow for a number of attachments to be readily attached to the AerWay.

• The heavy duty rollers use 4 tines per row at 7.5” tine spacing. Each roller shaft is mounted with two C-Flex Springs and supported by 50mm (2”) trunnion mounted bearings. The rollers are equipped with either Shattertines or Leaf Tines. All units use Outboard Stars to give uniform tine spacing across the working width of the machine.

• Swing arms can be adjusted in 2.5° degree increments, from 0° to 10°, to vary the degree of cultivation or aeration.